Hueforge Spider Gwen

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 92.42x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Blue Transmission Distance: 5 PLA Pink Transmission Distance: 3 PLA Grey Transmission Distance: 1 PLA White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Pink At layer #14 (1.2mm) swap to Grey At layer #16 (1.36mm) swap to White for the rest.