Hueforge strangethings swampthings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.88mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #9b8979 PLA Jessie Premium Tan 64 Transmission Distance: 1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #000000 PLA BambuLab Basic Black Transmission Distance: 1.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 5.1 #ff7713 PLA+ Esun Orange Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 2.8 #e11021 PLA Copymaster 3D Red Transmission Distance: 4Boost Melike my model boost for free i apperciate it have an idea you want drop me a line ill make you one you like !!! This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Tan 64 At layer #12 (1.04mm) swap to Blue Gray At layer