MakerWorld
Hueforge & Lithophane
Zum Modell
HueForge Teckel Pixar Style
61
Downloads
26
Likes
29
Makes
Design update contrast. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA Smartfil Black Transmission Distance: 0.4 PLA Smartfil White Transmission Distance: 6 PLA Smartfil Orange Transmission Distance: 1.2 PLA Smartfil Yellow Transmission Distance: 5.8Swap Instructions: Start with Black At layer #10 (0.88mm) swap to White At layer #21 (1.76mm) swap to Orange At layer #25 (2.08mm) swap to Yellow for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
