HueForge "This is Fine"

The original picture for this HueForge came from the user burkhart.andrew.j and can be found here:https://makerworld.com/en/models/61680#profileId-64099 I have reworked the profile to have a thicker base and in the project file the bottom layers are printed with a thicker layer height to speed up the printing process. This was done by snipping the original picture, loading it in HueForge and adding a thicker base, plus a lower overall height. Bambu Studio uses a modifier to increase layer height to 0.20mm in the black base reducing the printing time by nearly 3 hours. #1 Start with black (prints 0.2mm layers up to 0.96mm)#2 Switch to Red at layer 10#3 Switch to Yellow at layer 19#4 Switch to White at layer 22 The original description in HueForge with 0.08 layers and 0.24mm base layer: Swap Instructions:Start with BlackAt layer #16 (1.44mm) swap to Vermilion RedAt layer #25 (2.16mm) swap to YellowAt layer #28 (2.4mm) swap to White for the rest.