HUEFORGE University CREST

Project: hku_1.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 167.34x200.78mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA Jessie Premium Yellow Bird Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #9 (0.64mm) swap to Marine Blue At layer #14 (0.94mm) swap to BambuLab Green At layer #16 (1.06mm) swap to Red At layer #22 (1.42mm) swap to Yellow Bird At layer #29 (1.84mm) swap to Ivory White for the rest.