Hueforge Vecna and Eleven

VECNA AND ELEVEN 200 X 200 Projet: Hueforge Vecna and Eleven.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x201.61mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.32mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00aaff PLA Bambulab Basic Cyan Transmission Distance: 5 #ff1129 PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsInstructions de changements: Commencer par Black At layer #12 (1.04mm) swap to Blue Gray At layer #15 (1.28mm) swap to Cyan At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #24 (2mm) swap to Jade White pour le reste. How to change colors with just one AMS :