Hueforge Vegeta daima

Project: vegeta.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 250x140.63mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA Overture Matte Light Blue Transmission Distance: 1.8 PLA Overture Yellow Transmission Distance: 9.7 IMAGE #f5e4ae Transmission Distance: 1 PLA Kexcelled Orange Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5This print uses 8 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray At layer #11 (0.96mm) swap to Marine Blue At layer #13 (1.12mm) swap to Light Blue At layer #16 (1.36mm) swap to Yellow At layer #22 (1.84mm) swap to #f5e4ae A