Hueforge Vintage Beer

Hueforge Vintage BeerBoost MeBoost Me PleAse :p:d Project: Beer Vintage.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 169.62x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mm Filaments Used: PLA Sunlu/Jayo Black Matte Transmission Distance: 0.1 PLA BambuLab Dark Grey Transmission Distance: 0.2 PLA Sunlu + Sky Blue Transmission Distance: 4.2 PLA Sunlu Red Transmission Distance: 3.5 PLA eSun Yellow Transmission Distance: 4.9 PLA Sunlu Matte White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black Matte At layer #7 (0.64mm) swap to Dark Grey At layer #9 (0.8mm) swap to Sky Blue At layer #15 (1.28mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!