Hueforge Wednesday Addams

Project: Wednesday_Front_170x170.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170.14mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Blue At layer #21 (1.76mm) swap to Beige At layer #23 (1.92mm) swap to Lilac Purple At layer #24 (2mm) swap to Beige Border Only Colors from here until the end. At layer #26 (2.16mm) swap to Jade White At layer #29 (2.4mm) swap to Black for the rest. BAMBULAB A1 MINI : For the use of the A1 Mini profile (4 AMS colors). At the time of the pause, ple