Hueforge with Jigen Daisuke Frame

Cornice di Stampa personalizzabile nei coloriDi seguito istruzioni per Hueforge: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x125mm in sizeYou may print at higher layer heights below the Min Depth of 1.6mmThe Max Depth is 2.9mm and the Actual Depth is 3mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 1.4 PLA BambuLab Matte Ash Gray Transmission Distance: 2.6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #24 (2mm) swap to Ash Gray At layer #29 (2.4mm) swap to Ivory White for the rest.