[hueforge]Zenless Zone Zero Vivian Banshee

建议0.2的配置 Project: 薇薇安 get.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.56x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Tough Lavender Blue Transmission Distance: 2 PLA Protopasta White Transmission Distance: 3This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #3 (0.32mm) swap to Red At layer #7 (0.64mm) swap to Yellow At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Blue At layer #18 (1.52mm) swap to Lavender Blue At layer #19 (1.6mm) swap to White for the rest. ---------------------------------------------------------------------------------------------------------------------------