Hulk V2

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 112.11x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Chrominal Shadow Gray Transmission Distance: 3 PLA INLAND RED Transmission Distance: 3.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #16 (0.76mm) swap to Jade White At layer #31 (1.36mm) swap to Shadow Gray At layer #33 (1.44mm) swap to RED At layer #40 (1.72mm) swap to Jade White for the rest.