Thingiverse
humangear capCAP+ TPU-strap
di MacNeill
10
Download
12
Likes
1
Makes
This design is the TPU version of this: https://www.thingiverse.com/thing:4575223
For best results and a durable strap make sure the part is oriented at a 45 degree angle on the printbed. The layer orientation of the strap should NEVER be perpendicular to this alignment. The first and last layer of the flat part of the strap should align in the diagonal direction, as shown in the images. The orientation of the layers between them sould be at a 45 degree angle to the diagonal axis. One image shows the correct settings (unfortunately the first two digits are cut off in the image. It is [45, 90, 180,45, 90,180,45]) of the orientation for a layer height of 0.2 mm.
For best results and a durable strap make sure the part is oriented at a 45 degree angle on the printbed. The layer orientation of the strap should NEVER be perpendicular to this alignment. The first and last layer of the flat part of the strap should align in the diagonal direction, as shown in the images. The orientation of the layers between them sould be at a 45 degree angle to the diagonal axis. One image shows the correct settings (unfortunately the first two digits are cut off in the image. It is [45, 90, 180,45, 90,180,45]) of the orientation for a layer height of 0.2 mm.
MacNeill pubblica anche su
87 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
