Hummingbird Remix

First of all I want to thank gzumwalt for such an interesting design. I started out to just change the threading tolerance, but also had to change the tolerances of the bushings and gear holes. Think I changed 30 of the 38 parts and added a hand crank since I was not going to use a motor. I started to use the hand crank that someone else designed, but then I ended up making a motor gear axle so it stayed in place better. Most of the tolerances I made .4mm difference in diameter from Male to Female connections. For the gears, I initially did not have the bevel on the outside of the gears, but after I changed the compound gear to a bevel cut it works better. The bushings that go inside the gears I changed from 8.0mm to 8.9mm diameter to make them a little thicker. Consequently, I also had to change the gear holes. Since I had to change the Base a little, I also made the corners rounded.

There are 2 versions of the base, one hollowed out on the bottom **Base_Mod_HollowBot_Rev9.stl*