Hydra Single & Multi Headphone Holder

This is a headphone stand, 100% printed parts. Okay not 100%, if you need to wall mount it the french cleats accept screws or double stick tape.All in it really only uses like.. 300g of filament for the single version, and with some puzzle skills it can all be printed on a single 256x256 build plate.Usage InstructionsPress the Marquee to release the joint and rotate for both the Arm and the HolderPlace headphones on the stand Admire the sheer beauty of industrial design and over-engineeringAssembly Instructions:If you love yourself, don't use internal supports. Touching build-plate only (except on the springs, the need all the support they can get. I suggest trees.)If you use the wall base, just print the wall base and two cleats.Don't put the marquees in before it tells you to.. they go in very tight. Print the parts needed off the BOM belowInsure threads on the Cap and Bolt are clean (may need a tapping/die tool if printed in PETG)Insert the key into the Holder and press it into the