Hydroknecht Smart Modular Hydroponic System

I remixed this model from Printables.(I only remixed the “non smart” model but the smart model is available from the creators GitHub below…..) Remix changes:Made it into a 3mf and tweaked the print settings to be more economical while still retaining strength (Gyroid infill, 7%)Changed layer height to 0.20mmAdded an extra wall loopCreated a bucket “adapter” to fit on an Ikea AKERBAR 4.5L bucket. This adapter prints in 2 parts and needs to be glued/siliconed together (I used CA glue and its holding strong - you may prefer to use silicone if you want it to be more watertight). Refer to the model pics to see how it looks assembled NOTE: I did not print the reservoir, so I do not have advice on how to print it best to ensure watertight print - see the original creators comments below….. I printed on a P1S using PETG Original text from the model creator:HydroknechtHydroknecht is a smart modular 3D-printed Hydroponic system. Based on a rain-tower design it can be built to fit multiple module