Thingiverse

Hydroponic Vertical Tower

di 3D_Peeters

221 Download

186 Likes

0 Makes

This is a vertical tower for hydroponic. This one is made from a 4inch ABS tube (99,75mm ID x 114,15mm OD) but I recommend you to use PVC. The cups and the holders are a tight fit so the cups won't come off the holders. Those holders are 30 deg angle. For the holes in the ABS tube, I cut them with a 2.5inch hole saw. For water coming on top, I use the one below with a flexible tube. For the foot it's a conic one so more the tube goes down, more it's tight and you'll probably have to sand it to fit at your height

Water Pump: https://www.amazon.ca/-/fr/Pawfly-Submersible-Fountain-Aquarium-Hydroponic/dp/B01NBPCVW3/ref=sr_1_4?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2WZ53EVKHM9H4&keywords=hydroponic+pump&qid=1590018910&sprefix=hydroponic+pum%2Caps%2C162&sr=8-4

2.5inch hole saw: https://www.amazon.ca/-/fr/cloche-bi-m%C3%A9tal-vitesse-arbor%C3%A9e-1772954/dp/B004YK5DHW/ref=sr_1_3?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=2.5inch+hole+saw&qid=1590018944&sr=8-3

ABS DIY hydroponics hydroponic hydroponics Hydroponic System hydroponic Vertical modular hydroponics pvc pvc fitting pvc pipe vertical water water pump ABS DIY hydroponics hydroponic hydroponics Hydroponic System hydroponic Vertical modular hydroponics pvc pvc fitting pvc pipe vertical water water pump

Fonte

Thingiverse

Cosa serve per stampare: Avanzato Bassa affidabilità

Perché?

post-lavorazione significativa

Supporti 1/3

Assemblaggio 2/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 2/3

Stampante

FDM / FFF