Hyena HueForge

Picture source/author: @hanzo.ai.art / HanzoAIThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Model is 150x200 mm in size. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 4.8 PLA Elegoo + White Transmission Distance: 7This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Orange At layer #16 (1.36mm) swap to Wh