Hygrometer Hanging Hook

Part of my project to turn an old mini fridge into a filament storage chamber, I needed a way to hang a hygrometer from the racks so I could monitor the humidity without the meter getting in the way. The hygrometers used are these. It's designed to print in place, and should take 10-20 minutes. Openings on the sides help fit flexible tabs on the sides of the meter (they don't actually help very much though), and cutouts on the front/back are to help give you something to grab if you need to remove it. The overhangs on the back are angled at about 50 degrees, so shouldn't require supports. The inner diameter of the hook is 4mm (in CAD, slightly less when printed). It's printed with the hook on the front (closer to the display than the back) on purpose so that it'll be back heavy. That way gravity helps angle it upward a bit for easier reading. Printed with: 0.2mm Layer Height 10% Grid Infill Brim Off It may add one if you leave it on auto, but I didn't need one to get it to adhere I tend to do random seam position for functional, out of view prints like this. But it shouldn't matter It would be easy to adjust the hook size if needed too. So I'd be happy to adjust it or provide the model as needed