Cults3D
€ Paid
Home
Model downloaden
Hypnotic wind spinner
0
Downloads
10
Likes
0
Makes
Hypnotic windspinner that spins almost frictionlessly in the slightest wind.
One fan's blades are designed to spin clockwise and the other clockwise. The wind spinner can be attached both vertically and horizontally! Very easy printing without supports!
The stand has both brackets/recesses to be attached with zipties securely and around, for example, a balcony railing as well as holes to be screwed into wood.
The hole in the fans has a diameter of 4.6 mm which is perfect for a long M4 screw or an inch screw of size number 8. The stand's hole has a diameter of 4 mm which means that the thread can be screwed directly into the plastic. Alternatively, a 4 mm nail can be used directly. Also included are spacers to keep the distance between the fans and between the stand, print several pieces and use where needed.
The diameter of the fan is originally 220 mm, which fits exactly on a Creality ender V3 KE, but can of course be scaled to the desired size both up and down.
One fan's blades are designed to spin clockwise and the other clockwise. The wind spinner can be attached both vertically and horizontally! Very easy printing without supports!
The stand has both brackets/recesses to be attached with zipties securely and around, for example, a balcony railing as well as holes to be screwed into wood.
The hole in the fans has a diameter of 4.6 mm which is perfect for a long M4 screw or an inch screw of size number 8. The stand's hole has a diameter of 4 mm which means that the thread can be screwed directly into the plastic. Alternatively, a 4 mm nail can be used directly. Also included are spacers to keep the distance between the fans and between the stand, print several pieces and use where needed.
The diameter of the fan is originally 220 mm, which fits exactly on a Creality ender V3 KE, but can of course be scaled to the desired size both up and down.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
