Thingiverse
Hyve SFF ITX computer case
1
Download
3
Likes
0
Makes
After a bit of a rough troubleshooting saga resulting in me rebuilding my main computer, I ended up with a spare ITX motherboard and fell into the SFF formfactor build space.
Here's a ~6L mini-ITX PC case that can either be laser cut from your choice of material (image is 1/4" / 6.35mm cedar shiplap) or 3d printed in individual panels and glued together.
6mm plywood would be the best for strength, the cedar shiplap tends to break easily but it certainly looks and smells nice.
Specced for a dual-slot low-profile gpu such as an intel arc pro B50, A350, RTX 3050, 4060, 5060, A2000 or A4000SFF and a 1U/Flex ATX power supply (unit used in mine is a 600W platinum silverstone PSU). CPU cooling clearance allows for a Thermalright AXP90-X53 low profile cpu cooler (or smaller). if your cable management is good you will have space for up to 3x TL9015 slim 92mm cooling fans to act as exhaust. I went with a magnetic closure for the side panel but you can modify it to your hearts desire to use bol
Here's a ~6L mini-ITX PC case that can either be laser cut from your choice of material (image is 1/4" / 6.35mm cedar shiplap) or 3d printed in individual panels and glued together.
6mm plywood would be the best for strength, the cedar shiplap tends to break easily but it certainly looks and smells nice.
Specced for a dual-slot low-profile gpu such as an intel arc pro B50, A350, RTX 3050, 4060, 5060, A2000 or A4000SFF and a 1U/Flex ATX power supply (unit used in mine is a 600W platinum silverstone PSU). CPU cooling clearance allows for a Thermalright AXP90-X53 low profile cpu cooler (or smaller). if your cable management is good you will have space for up to 3x TL9015 slim 92mm cooling fans to act as exhaust. I went with a magnetic closure for the side panel but you can modify it to your hearts desire to use bol
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
