Thingiverse

i3 Rework E3D Extruder

by Mak-a-face

563 Downloads

366 Likes

4 Makes

For use with Prusa i3 Rework X-Carriage.
The inspiration came from [ch1t0's i3 extruder design](http://www.thingiverse.com/thing:76660).

I initially began designing this extruder to work with the [E3D Hotend](http://e3d-online.com) because of the sloppy fit on the original version but the one thing I really wanted, was to install 60mm cooling fans.

In addition I design a E3D 40mm shroud that works with v4, v5., plus a Dual 50mm Cooling fan holder and a 60mm Cooling Fan Holder. 2 different clamps, one is just plain and other one has extension for addons you want to put on.

Fan Cover used: [i3 40mm Fan Cover](http://www.thingiverse.com/thing:210215) and [Open Hardware 60mm Fan Cover](http://www.thingiverse.com/thing:256447).

Other parts I used - [RichRap's Guidler with Lever](http://www.thingiverse.com/thing:19142) and [schlem's Skulltruder Gears](http://www.thingiverse.com/thing:49220).

Funny note: When I started the 60mm fans (I know, OVERKILL) it sounded like a jet en

cooling E3D E3D v6 extruder greg i3 i3 rework prusa prusa i3 rework shroud v4 V5 wade cooling E3D E3D v6 extruder greg i3 i3 rework prusa prusa i3 rework shroud v4 V5 wade

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format