Slicer Discord
Ice Cool Breezer – 3D-Druckmodell von Creality Cloud Creality Cloud

Ice Cool Breezer

von
0 Downloads
0 Likes
0 Makes
Zum Modell
Summer is coming and your fridge is full of ICE!Cool Air for 2-4 hours, *(Depending on fan type and speed)Drill hole to the center bottom, water siphoning hole is too tiny. Sorry.Works both ways, pull and push.One has wider area and gentle breeze, other is more aggressive point cooling.1) Wide area Push: Fan will push air in and it comes out at non fan side.2)Narrow area cooling: Fan pulls air from inside and out of the fan side of a wall.So pay attention to fan orientation!----------------------------------------------------------------Uses 120mm standard PC fan.Uses either screws or bamboo grill sticks that are cut to size.Needs 12V power supply but can work at much slower speed with 5V as well, USB is 5V, so you can use phone chargers, not recommending PC or laptop, because you can overload it with too powerful fan, but when you really need to then, at least use two cables at once for a fan.----------------------------------------------------------------Fan is designed to be mounted with cut bamboo grill sticks, holes have thin wall stops, but you can punch or drill them out, also you can Use screws to mount, standard PC fan screws should work.' I myself used extra thin fan, and I recommend it for best esthetic look, lower weight and lower noise as well.' Lower bowl thing is for catching condensation and making more stable by widening footprint.' It has water lock for holding cold water longer at chamber to be get more cooling out of ice, any water too high will be drained into jar under.'Make sure you use apply gap fill everywhere and at least 2 walls for 0.6 nozzle and 3 or more for 0.4 nozzle, also 5 or more top layers to make sure it won't leak. (for a body and stand, because they are critical)
Quelle
Creality Cloud
Veröffentlicht
Was du zum Drucken brauchst: Mittel Mittlere Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Polycarbonate
Farben
2 (AMS/MMU empfohlen)
Ca. Druckzeit
4 h
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen