Thingiverse

ICF - Inductrix Custom Frame

von a768phoenix

45 Downloads

40 Likes

0 Makes

This is an 104mm picnic frame for the Blade Inductrix FC, 7mm Hubsan motors and props and the FX797T cam/vtx combo. I changed the power cord to JST to be able to use 400mAh 1S lipos and used a short velcrostrap to fix them to the frame. I also used 3mm nylon screws to fix the FC to the frame. The frame weight by it self 5g and the total weight with 400mAh lipos is 40g. The average flight time of this combination is close to 7 minutes.

7mm brushed FX797 Inductrix picnic frame tiny whoop 7mm brushed FX797 Inductrix picnic frame tiny whoop

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nylon, Carbon Fiber

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

ICF - Inductrix Custom Frame

Ähnliche Modelle

Zur Sammlung hinzufügen