icinga.com logo, 3Dfied, segmented
di kartellchef
2
Download
2
Likes
1
Makes
[The 3Dfied icinga.com logo](https://www.thingiverse.com/thing:3866926) divided by its spheres and cylinders for 3D printing it bigger and slots for the cylinders in the spheres not to require any glue.
Every part must be printed exactly once.
**Do not print the cylinders as-is!** The slots for them have been made by boolean or operations, so they're exact in theory. But **in the field** they seem to be "too exact", so the cylinders are **a bit too big** to be plugged into their slots. Solution:
1. Place all models on the slicer's build plate.
2. Scale all of them at once as you need.
3. Scale the cylinders' shortest side a little bit down, e.g. by a small multiple of the line width. [This one](https://www.thingiverse.com/make:729797) (scale: 490%) required a tolerance of 0.5mm.
Every part must be printed exactly once.
**Do not print the cylinders as-is!** The slots for them have been made by boolean or operations, so they're exact in theory. But **in the field** they seem to be "too exact", so the cylinders are **a bit too big** to be plugged into their slots. Solution:
1. Place all models on the slicer's build plate.
2. Scale all of them at once as you need.
3. Scale the cylinders' shortest side a little bit down, e.g. by a small multiple of the line width. [This one](https://www.thingiverse.com/make:729797) (scale: 490%) required a tolerance of 0.5mm.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
