ICOM 705 Battery Pi Mount

AnyCubic KAD MZ2

Items Required.
4 x Printed Bushings STL
2 x Printed Locks STL
2 x Printed Pins STL
1 x Printed 705-Battery-Pi STL
4 x M2.5 x 16mm Screws to mount the pi.
2 x Springs 11mm long and 4mm diam for Locks, I used a spring from an old ink Pen.

Screws to mount the Pi are 2.5mm x 16mm and screw directly into the holes without drilling and tapping.

Pins for locks are super glued into the lock blocks with very little glue and its important to keep the the lock blocks moving until the glue drys.