ICOM ID-4100 head mount

ICOM ID-4100 Head Bracket V1
============================

After the original bracket broke, I decided to do my own thing. ICOM is nice, but the proprietary mounting method isn't fantastic.

As such, here is a bracket which will accommodate your own ideas and designs or to completment/replace the original.

If used in a vehicle use PETG/ABS or another temperature resilient material.
=============

**There is a one piece design and a two piece design.If you only want the section that fits on the radio print the "Head_Unit_Mounting_Front" file**

What will be needed:
-----------------------------
- **Mount with a 1/4-20 UNC Thread** (camera tripod style) Dashcam mounts work well if you want to suction mount it.
- **Epoxy**; good epoxy to mount the washers in place (you can bolt them in so long as the washers are countersunk but I use epoxy to keep things flush)
- **Star washer** for the 1/2 to hold it to the plastic shank firmly
- **Two steel or iron washers** If using