Icom Portable Plug Shroud

A shroud and mount for a 2.5mm and 3.5mm plug to suit Icom portable radios such as the IC-41 series and IC-A15/16 units. The shround will space the plugs correctly for the radio at the correct depth, and will fit any of the IC-41 series UHF radios or the Icom A15 and A16 (and maybe the A25). Note the connnection will NOT be waterproof.

Additional parts required:
2.5mm stereo plug, (PP0103 Jaycar)
3.5mm stereo or mono plug, (PP0130 Jaycar)
USB cable (4 core shielded),
Epoxy glue, (Araldite r similar)
M2x0.4mm pitch x12mm bolts and nuts.

The plugs should have the ground support section cut off about 6mm up from the base. Some Epoxy glue should be put in the holes on the base section of the shroud and the two plugs inserted from the bottom with the ground support stubs facing inwards toward each other until both are level with the bottom of the moulding and straight. Let the epoxy set before continuing, then thread your cablethrough the hole in the top of the shroud a