Icon 1/2" Ratchet Universal Modular Gridfinity Bin

Hey all, here's something a little different than what I've been doing. Since I started making these, my goal was always to make a modular system that you could mix and match as new tools came out. My problem was that there was so much variety in lengths on the 3/8" sizes that it never quite worked like I wanted, so here is my first attempt at it in the ½" size. Here's the idea: start by printing the ratchet head. Lay in your ratchet on top of your grid and see where the handle lands out. If it's close to the end of a grid, print the longer end. If it's closer to the start, print a shorter one. If you want a support for flexes or long ratchets, you can print the middle narrow section to support it in the middle. Whatever gaps are left over you can print my intermediate bins that connect with the guide pins, you can either have the Icon logo on them or have them blank and you can have one continuous bin (that will want to stay better when removing the ratchet). If you don't want to prin