3DSEARCH

Discord

IDEA Night lamp - Standing – 3D printable model from MakerWorld

MakerWorld

Decor

IDEA Night lamp - Standing

by Lars 🙂 · Decor

111 Downloads

65 Likes

65 Makes

Go to Model

IDEA – Lamp Standing versionA simple, fast print but yet a cool decorative lamp! Perfect for on a shelf, your desk or night stand. Check my profile for a hanging version with magnets!Only 1,5 hours of printing ~15 grams of plastic.Requirements:38mm tea light (If you have a slightly bigger tea light, send me a message and i will give you a modified version.)GlueWhite PLAGrey PLA (other colors possible)Assembly:Push the tea light in the “38mm RING”. If the tea light is to loose use some tape around the edge of the light to make the fit a bit tighter.Push the assembly “38mm RING” + Tea light in the lightbulb.Add some drops of glue in the slot of the “Fitting” where the lightbulb needs to go in.Done! (Don’t forget to leave a picture of your results!)

bulb decor decoration desk desktop lamp lamp art led ledlight light light art lightbulb lights night night lamp nightlamp nightlight nightstand reading accessory

Category

Decor

Source

MakerWorld

Published

29.01.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

significant post-processing

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

5 h

Post-processing

Gluing, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for IDEA Night lamp - Standing?

Any FDM printer should handle IDEA Night lamp - Standing just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print IDEA Night lamp - Standing?

According to the design notes, IDEA Night lamp - Standing takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is IDEA Night lamp - Standing available in?

IDEA Night lamp - Standing is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is IDEA Night lamp - Standing free to download?

Yes, IDEA Night lamp - Standing is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL