IDEX Conversion for CreatBot F430

#### Warning
Extensive electrical and software modifications are required in addition to these mechanical changes.

## CreatBot F430 IDEX

Upgrade your CreatBot F430 to an IDEX printer compatible with more modern toolheads.

The x-axis geometry is based on the geometry used in Voron printers, making most toolheads compatible with minimal modifications.

Make sure you print these parts in a material that can withstand the high temperatures inside the printer chamber. I have had success with performance ABS but ultimately chose to have these parts SLS printed in a high temperature nylon.

### Parts List

| Qty | Description |
|:-|:-|
| 1 | 20mm T-Slot (or V-Slot) Extrusion, 590mm Long |
| 1 | MGN12 Linear Rail, 550mm Long |
| 2 | MGN12H Carriages |
| 2 | NEMA17 Stepper Motor |
| 2 | GT2 Pulley 20t, 6mm Wd |
| 24 | F623 Bearing |
| 4 | M5 BHCS x 10mm |
| 2 | M5 BHCS x 12mm |
| 8 | M3 BHCS x 6mm |
| 4 | M3 BHCS x 8mm |
| 4 | M3 BHCS x 10mm |
| 10 | M3 BHCS x 12mm |
| 8 | M3 BHCS x 22mm |
|