ifs 1/10 scale

Front IFS suspension, roughly 1/10 scale. In the picture, it’s using a TRX4 tire. Everything is 3D printed except for the M3 screws — you’ll need 16 of them. The holes can easily be drilled out to fit M4 screws if needed. It uses 4mm deep, 11mm tall bearings for the axle shafts. I used Pro-Line Racing 1/10 Front PowerStroke shocks and removed the front shield to allow for more space. All parts were printed in PETG with 30% infill and 2 walls. The ball joints were printed with a 0.2mm nozzle at 100% infill and are press-fit into place.