Igaro D2 Handlebar Mounting Bracket

This bracket mounts an Igaro D2 on the handlebar or similar. It features dual nut recesses so can mount on either the left or right and is only 20mm wide.

Cables should rotate with the handlebars and not be tight as to excert undue force on the Igaro D2's power input pins or USB port. Although water will naturally run towards ground the user may wish to fit a skirt around the bottom using a little 3M tape and tent-like material.

The M4 through-hole requires a M4x15mm allen bolt, a M4x10mm washer (x2) and a nut (nylon recommended). Don't over-tighten, just ensure the unit doesn't move and nip it a little further.

A M5 nut fits into either recess. A bolt comes through a handlebar strap type mount (the sort that comes with bicycle lights) and then needs about 7mm further length to fit the bracket. As such you may need a few different length M5 bolts (or M5 washers) to get the length right.