Igris Solo Leveling HueForge

9 color image Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 155.54x220mm in size You may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.16mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #950051 PLA BambuLab Matte Plum Transmission Distance: 1.6 #bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5 #ff749e PLA+ Esun Pink Transmission Distance: 5 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 9 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Ash Gray At layer #9 (0.8mm) swap to Dark Blue At layer #11 (0.96