Thingiverse

Ikea Dragan Speaker Box

von drgrandios

38 Downloads

32 Likes

0 Makes

This is basically a frame to connect the two halves of an IKEA Dragan box (the bigger one) with a magnetic door latch:
https://www.ikea.com/de/de/catalog/products/40222607/
(The magnet mount is called "flap" in the SCAD file, current size is 12x38mm with a hole distance of 27mm, feel free to customize this for your own magnets ... )

My speaker cover I used for this project can be found here:
https://www.thingiverse.com/thing:3268837

I put a Raspberry Pi Zero W with Pimoroni's Phat Beat in it,
https://shop.pimoroni.com/products/phat-beat
added a chinese RFID reader (less than 4 Eur),
https://www.aliexpress.com/item/USB-port-EM4001-125khz-RFID-ID-Contactless-sensitivity-Smart-Card-Reader-support-window-system/32743649284.html
a membrane button pad (less than 1 Eur),
https://www.aliexpress.com/item/1-2-3-4-Key-Button-Membrane-Switch-Matrix-Array-Keyboard-Keypad-Control-Panel-Pad-DIY/32915945543.html
a Visaton FRS8 M speaker (about 10 Eur) and made use of the wonderful piCo

beat box dragan ikea Loudspeaker pHat picoreplayer Pimoroni Pi Zero raspberry Raspberry Pi Raspberry Pi Zero speaker Speakers squeezebox beat box dragan ikea Loudspeaker pHat picoreplayer Pimoroni Pi Zero raspberry Raspberry Pi Raspberry Pi Zero speaker Speakers squeezebox

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat