Ikea Lack 3D printer Cabinet - Hardware

Just a very simple setup for adapting 2 Ikea Lack side tables to make a 3D print cabinet. Most other designs were too complicated and required many different parts. I set this up to use just two parts files. They can all be arranged carefully to print in just a single print or two (depending on your machine).

Prints:
8 x Foot Locators
4 x Door Tabs

Hardware:
qty.12 M4x0.7 x 10mm (sides to brackets)
qty.32 1/8 x 3/8" wood screws (brackets to tables)
qty.4 1/8" x 3/8" Wood Screws (door tabs)

Sides and Door:
qty.3 17-1/2 x 15-3/4 for sides and back
qty.1 20x17 board for lift off door (clearanced in 4 spots for the tabs)

I used 1/8" tempered hardboard for the sides and door. I also had some glass lying around, so I put a window on it. You could also just get a 1/8" thk sheet of plexyglass/etc.

Enjoy!

*** Sorry some of my pictures are sideways, I took them on the phone and had no way of rotating