IKEA Lack enclosure (spool inside)

I made this remix because I didn't want to unmount the spool from the printer. I need to make a lot of mod to my SV06, so I decided to keep the spool in place and not cut the filament every time I would have to remove the top of the enclosure (pretty often until now).
Also, I didn't find the screws that Dominik Císař used, so I adapt all the holes to the ones I found.


**Hardware:**
+ n°12 flat-head wood screws 5x20mm
+ n°20 flat-head wood screws 6x50mm
*All the bigger screws are going to be placed inside the already drilled holes that you will find in the table's parts.*

The main idea is that I use another Lack's legs to build a higher top part of the enclosure. The connection is made with the extender parts. There are 3 different models of this extender because they have a seat for the plexiglass.

**Plexiglass panels:**
+ n°3 440 x 845mm thickness 3mm
+ n°2 220 x 845mm thickness 3mm

I have coupled this with my [PSU holder for Sovol SV06](https://www.printables.com/it/model/548618