Ikea Lack H2D Version

This is a modified Ikea Lack table to get a perfect H2D setup. With printed connectors and easy assembly.+ optional TPU Anti-vibration feet You need:1x Ikea Lack 55cm x 55cm x 45cm: https://amzn.to/4ab6RBi *30x 4,5mm x 25mm drywall screws: https://amzn.to/48eWAkX *3x Wood panels 40cm x 44,5cm x 1,8cm from the hardware store Assemblysteps:Assemble the Ikea Lack 2. Screw the self aligning connecters firstly in the ikea lack plate then in the ikea lack feet with the drywall screws 3. Align the Wooden side walls to the connectors and drill them with a small drill (3mm) to prevent damage in the wood 4. Screw the drywall screws in the drilled holes 5. Measure 3 cm from the bottom of the feet and screw in the drywall screws 6. (optional) Print out the TPU feet to prevent vibrations on the floor *The Links are affiliate links to supports my work. It doesn`t cost more Thank you and happy printing.