Thingiverse
IKEA Lillabo Bridge stabilizer
by torwan
15
Downloads
10
Likes
0
Makes
**IKEA Lillabo Bridge Stabilizer**
You will need two identical parts per a bridge. Print positioned as in the STL file (laying on the sidewall). Recommended infill 20% or more.
The stabilizer is designed to fit a **wooden bridge pillar** which measures **30 x 66 mm** with a little play. If your pillars have other dimensions, you can use provided OpenSCAD file to change the part dimensions and to generate your own, tailor-made STL file.
You will need two identical parts per a bridge. Print positioned as in the STL file (laying on the sidewall). Recommended infill 20% or more.
The stabilizer is designed to fit a **wooden bridge pillar** which measures **30 x 66 mm** with a little play. If your pillars have other dimensions, you can use provided OpenSCAD file to change the part dimensions and to generate your own, tailor-made STL file.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
