imou db2s dourbell bracket

The Imou DB2s is a cost-efficient smart doorbell. The only designflaw is that the bracket that comes with the doorbell has no room to tuck away cabling when the doorbell is hardwired. I solved this by designing my own bracket. It works like a charm. The current bracket is designed for the doorbell to be mounted right from the door. You can easily mirror the item so you can use it on the left side of the door if you require this. The rounded side is the bottom and the backside that comes with the camera is still required to mount the doorbell. You need 4 additional screws. 2 for mounting the doorbell bracket to the 3d printed bracket and 2 screws to mount the 3d printed bracket to the doorpost.

Print this in ASA, ABS or PETG for best results.
I used ASA and is as strong as it can be.
0.20 layer height and 10% infill is more than enough.
5 top layers, 3 bottom. 6 wall loops.
I always use 5mm outer brim when printing ASA or ABS as both a prone to warping. This model printed perfectly