Cults3D
€ Paid
Game
Ver Modelo
IMPACT209
0
Descargas
0
Likes
0
Makes
Impact grenade using .209 primer
8x32 2inch long screw
12mm OD spring with 1.5 or 1.7inch length
M4 threaded insert
M4 steel screw
Cotter pins to hold the spoon and lock it
You can bypass all of the above with a 8x32x 2 1/2 screw that you will grind into a tip. using a 8x32 nut to sandwich the spring disk all into one piece.
Most parts are a little loose except the primer holder, that needs to be a tight bore so that the primer doesn't fall out while running etc. sanding a few parts may be necessary depending on your printer.
Added a trip wire detent that bypasses the impact to allow boobie traps... he he he boobie...
100%infill print most standing
PETG
Working on TPU skin to prevent fragmentation as a redundance
8x32 2inch long screw
12mm OD spring with 1.5 or 1.7inch length
M4 threaded insert
M4 steel screw
Cotter pins to hold the spoon and lock it
You can bypass all of the above with a 8x32x 2 1/2 screw that you will grind into a tip. using a 8x32 nut to sandwich the spring disk all into one piece.
Most parts are a little loose except the primer holder, that needs to be a tight bore so that the primer doesn't fall out while running etc. sanding a few parts may be necessary depending on your printer.
Added a trip wire detent that bypasses the impact to allow boobie traps... he he he boobie...
100%infill print most standing
PETG
Working on TPU skin to prevent fragmentation as a redundance
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
