Thingiverse
IMPROVED Lil Hyper V3
2
Downloads
3
Likes
0
Makes
The refined and upsized Lil Hyper V3 is finally here! The improved blaster now has a larger grip, more styling cues from the Rush-40, and... A TRIGGER.
HARDWARE:
Should be functional using most of the nitefinder's stock hardware. However, it may require trimming the original springs or using different ones for the trigger and catch. I find a strongarm catch spring works reasonably well for the trigger.
ASSEMBLY:
1. Print both halves on the flat side with supports on. Make sure your bed is leveled properly (mine sure isn't) so as to prevent warping (which is extremely prominent on the muzzle of mine) Print the trigger without supports.
2. Clean up and trim the shell and internals, making sure that every part fits properly. If you want, you can test everything with only the right half and trigger printed. Secure the trigger using the nitefinder's original trigger screw or any similar screw with a flat metal bit on the end. Dremel the fin and other protrusions on the front mu
HARDWARE:
Should be functional using most of the nitefinder's stock hardware. However, it may require trimming the original springs or using different ones for the trigger and catch. I find a strongarm catch spring works reasonably well for the trigger.
ASSEMBLY:
1. Print both halves on the flat side with supports on. Make sure your bed is leveled properly (mine sure isn't) so as to prevent warping (which is extremely prominent on the muzzle of mine) Print the trigger without supports.
2. Clean up and trim the shell and internals, making sure that every part fits properly. If you want, you can test everything with only the right half and trigger printed. Secure the trigger using the nitefinder's original trigger screw or any similar screw with a flat metal bit on the end. Dremel the fin and other protrusions on the front mu
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
