MakerWorld

Decor

Incense holder dragon

by Arasaka.inc · Decor

504 Downloads

210 Likes

305 Makes

Go to Model

MembershipBoost MeSimple and beautiful dragon shaped incense holder. Fast print, only 1 hour and 36g of filament.

incense incense ashtray incense burner Holder holder dragon household house house accessories house accessory

Category

Decor

Source

MakerWorld

Published

20.11.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Incense holder dragon need supports when printing?

Yes, Incense holder dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Incense holder dragon?

According to the design notes, Incense holder dragon takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Incense holder dragon available in?

Incense holder dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Incense holder dragon free to download?

Yes, Incense holder dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Incense holder dragon

Similar Models

Add to Collection