Indian HueForge

Picture source - author: NotAn ArtManThen expanded and newly generated and used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size .stl file, the first is 200x200 and the second for A1Mini 150x150. The color change settings are identical. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 1.9mm and the Actual Depth is 1.9mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA Elegoo + Gray Transmission Distance: 3 PLA Elegoo + White Transmission Distance: 6This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (