Slicer Discord
Induction Heater IHMini for Dynavap – Modelo 3D imprimible de Thingiverse Thingiverse

Induction Heater IHMini for Dynavap

por Zaar137
4 Descargas
8 Likes
0 Makes
Ver Modelo
Induction Heater IH-Mini

I designed this IH with the right measurements for the Mini ZVS 12v board and the Mosfet. It has a switch to activate the external current input (can be omitted).

The measurements of the IH-Mini are 126x51x35mm.

It takes a minimum of 6 amps to discharge and a maximum of 12.6v, if you add more voltage it will burn.

The Mini ZVS board has been modified by changing the 2 induction coils for two smaller ones and removing a capacitor, the other must be changed to the opposite side. The heating coil must be soldered to the board, do not use the connectors it comes with for this, they must be removed. I recommend reviewing the board and at least soldering the junctions of the 2 mosfets it has.

I have added 2 covers with different holes to better place and see the multicolor led light, choose the one you prefer.

If you want it with an internal battery, I have designed this same model with a hole for the battery, measuring 126x85x35mm, you have it here
Fuente
Thingiverse
Lo que necesitas para imprimir: Principiante Confianza media
¿Por qué?
2 colores
Pieza única 2 colores / AMS
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
126 mm (Mediano)
Colores
2 (AMS/MMU recomendado)
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

1 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección