Infernal Rider HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 166.67x250.01mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Indigo Purple At layer #13 (1.12mm) swap to Red At layer #19 (1.6mm) swap to Yellow for the rest.