MakerWorld
Office
Voir le modèle
Infinite gridfinity shelf for Multiboard and other
282
Téléchargements
216
Likes
92
Makes
This is a shelf that can be connected to create a large-as-necessary shelf that can be attached to a substrate using bolts. This design specifically targets Multiboard, but it can be used with other systems, such as Skadis using the proper bolts. It can even be attached to a wall using screws! StrengthThese shelves are very strong. I suspect the Multiboard will start bending long before these shelves give up. Here is a simple test I conducted. You can see the flex of the MultiboardHow it worksStep 1: connecting the shelves The shelves are connected to each other using one or two bolts. Which hole to use is optional. Use the short bolts and the nut provided. The shelves have small stops for the nuts to make it easy to thread the bolts. There is no need to over-tight the bolts. Their job is to create a more rigid structure and to make sure the seam between shelves is as small as possible. Make sure the nuts do not protrude into the gridfinity area. There is a small hole in the front of t
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !