INLretro USB Programmer enclosure for NESmaker

This is an enclosure for the INLretro programmer-dumper PCB v2.0N. This is the slim version many have gotten for NESmaker.

Some notes on the design:

I wanted a small footprint, and I wanted the usb cable to exit out the back rather than the front. In order to achieve this, I designed this to use a right-angle usb cable. I used this one from Amazon: https://www.amazon.com/gp/product/B00FP32HI0/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

When attaching the board to the bottom tray, there are slots in the bottom to accept size #4-40 x 1/2 inch machine screws and nuts. The screws will stick out the bottom a bit, you can either trim them flush with a dremel, or alternatively print and use the included spacers. Another option would be to use self tapping sheet metal screws if you don't want to use machine screws and nuts.

I've included two versions of the top half of the enclosure, one with the NESmaker logo and one without. If you use the one with the logo, yo