Inmoov Bicep Covers

Many Thanks to- ”Mr Gael” Inmoov’s Designer

Inmoov Bicep Covers-

Update*- 2018 Feb-- Mr Gael has changed the Bicep framing so make sure you use the old version of the Bicep Frame if you use these Covers-- I I'm currently modding the Bicep frame too,,,, this is part of "Tweaking" process to improve inmoov performance and building process--

These are the Bicep Covers made into 1piece,,,,the have been Printed and all good so far,,, but further refinement might be needed to make them a perfect fit,,

Print with support --- Personal I use Slic3r with-2 Perimeters at 40mm/sec with 50% Infill and a default Layer width at 0.45mm and layer Hight is 0.2mm – for these parts (Nozzle is 0.4mm Ed3v6)

Use a large” Brim” at least 15 loops and 3 to 5 layers high,,,, a slight over extrusion on the first layer or lower your Extruder buy 0.1mm in the software is good idea – either way just make sure you have good adhesion –

Slow the infill speed to 60mm/sec so you don’t shake the shit