Inmoov Elbow Joint

-Many Thanks to -Mr Gael-


This Mod is very straight forwarded, it lets you bolt the elbows part together
instead of using glue.

There are 2 Version- one is same as the original part with the M8 Main Bolt-but with
two- 3mm bolt holes to join the pieces together—

The other uses a M5 Bolt—so there is now enough room for x2 bearing to be inserted -
The bearing a common R/C Car type --11mmOD X 5mmID X 4mmm Thick- --there used for the wheel bearing in Tamiya Cars/Buggy’s and a lot of other things,,, this part will still work if the bearing are not inserted . (the internal hole is 5.2mm). remember to push the M5 Bolt or a round file- In&Out- the hole a few times to remove the excess filament formed during cornering- In other words don’t think that hole is to small when you first try to insert the M5 bolt,,,

Hardware -- -M3 -16mm Socket Head- with Washer and LockNut for perfect fit-
This part was printed several times to make sure everything was correct-

There is a 8mm